- Support Multiple Battery Types: The solar charger controller is compatible with 12V 24V system. Discharge current: 30A, 4 USB ports. Support lithium battery and multiple types of batteries.
- 30A Solar Charge Controller: 32-bit CPU, 4-stage PWM charging (Bulk, Boost, Float and Equalization). This solar controller perfectly manages the work of solar panels and batteries in solar systems.
- Charge Controller with LCD Display: Comes with an LCD display which can show the status and data clearly. This 12V 30A solar charge controller can be easily switched modes and parameter configuration, suitable for home solar panel control system.
- Detailed Design: Compact in size, the PWM solar controller adopts a sliding cover which covers the terminal and the screwdriver, and hides the messy wires of the connector port by extending the bottom edge. Integrated screwdriver.
- Multiple protection: overload and short circuit protection, lightning protection, undervoltage protection, overload protection, load control for solar panels. Using PWM&WPC mode can improve system efficiency and extend battery life.
EKOTEK PWM SOLAR CHARGE CONTROLLER 30AH – 12V-24V – ET-B2430B
$55.00
Description
Additional information
| Brand |
Ekotek |
|---|
Reviews (0)
You must be logged in to post a review.
Expédition & Livraison
Related products
LUMINOUS SOLAR PANEL 12V/100W POLY
- Poly crystalline Cells type Panel
- Capacity 100 W, 12V
- Voltage: Voltage at Max Power (Vmax) - 18.05V, Open Circuit Voltage (Voc) - 22V
- Current: Current at Max Power (imax) - 5.82A, Short Circuit Current (isc) - 6.28A
- Compliance to IEC standards
- Best in Class conversion efficiency
- Anti-reflective coating and back surface (BSF) for more light absorption
- Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
- High strength light-weight aluminum frame design for high torsion resistance against winds and snow loads
- PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
- Excellent Low light performance in low visibility in clouds, evening, and morning.
LUMINOUS INVERTER SOLAR NXG S/Q WAVE UPS 350VA/12V
- Solar NXG 350 UPS Inverter - Solar NXG 350 Inverter Hybrid UPS
- Capacity:350VA/12V
- Voltage:12V
- Solar Panel:12V upto 200 Wp
- Operating Voltage:90V-290V
- Output Waveform:Square Wave
- Output Waveform>:> 80%
- Charge Controller Ratio:10Amp/12V
- Battery Included:No
- Battery Support Type:Single
- Solar Power Compatible:Yes
- Output Frequency:50Hz +/-0.5Hz
- No Of Load Output:230V+/-5V
- Display LED Indications:Switch On/UPS On/Low Battery/Chaging Mains/Chargng Solar
- Additional Features:USB charging for mobile
- Net Weight:4.6 Kg
- Gross Weight:5.3 Kg
- Product Dimension:232x123x196 mm
LUMINOUS INVERTER A/CHARGER SINEWAVE JUMBO 7.5KVA 120V
| Input Voltage | 110V -290V |
| Key Feature | High Capacity UPS for Small office and Big home |
| Battery Support | 120 Ah - 220 Ah |
| Battery System | 120V |
| Wave Type | Pure Sine Wave |
| Rated Capacity | 7500 VA |
| Output power | 6000 Watt |
| Charging Current | 12 Amps |
| Recommended Battery Ah | 135 Ah - 180Ah |
| Full Battery Recharge Time | 10 - 2 Hours |
| Output Voltage (volt) | 180V - 230 V |
KIPOR GROUPE DIESEL 5.5 KVA KDE6700TA3 THREE PHASE
Strong power
All diesel generator sets are equipped with KIPOR four-stroke engines, also the Kipor KDE6700TA3 Diesel Generator.
Digital control panel
All the control units of the diesel generator sets are on one panel, a monitor of the panel will display the real-timeworking data of the diesel generator set such as its output voltage and current etc. Besides, the running trouble of the diesel generator will also be displayed on the panel.
Advanced alternator winding
Waveform distortion is kept at a minimum level and the output is stable. The winding design protects the generator from short circuits and provides a stable output while running inductive loads.
Low oil alarm system
Before the oil level drops to the limited level, the generator set will stop automatically. The whole set can be restarted only if the oil is refilled.
Application of new Automatic Voltage Regulator
The Automatic Voltage Regulator not only can smooth the output but also can provide reasonable protec-tion against the overload of the whole set, thus avoid damage to the set.
STEREO BLUETOOTH BAFFLE 1.1CH + USB ADAPTOR/CABLE A/SOLAR PANNEAU 5.5V/3W R – ET-9093 – EKOTEK
- 1.1 CH outdoor bluetooth boombox
- 12W sound output
- FM radio digital scan
- USB supports MP3 playback
- Bluetooth version: V2.1+EDR supports A2DP, AVRCP
- Clear sound and heavy bass, dynamic sound effect, 10m operating range
- AUX-In via 3.5mm input jack
- Preset equalizer setting
- High quality rubber coating
- PV leather carrying strap
- Charge time DC adaptor via micro-USB: 6-8 hours
- Charge time solar panel 2W/5V: 6-13 hours
- Working time: 3-10 hours
- Battery: 3.7V/3000 mAh Lithium-Ion
- Accessories: USB adaptor USB charging cable AUX cable 3.5mm > 3.5mm plug Solar panel 2W/5V
- Solar panel size: 195.5x85.5x2.5 mm
- Product size: 275x114.5x128 mm
- Color: grey with black, grey with blue, grey with red
STEREO LANTERN A/BLUETOOTH BAFFLE 1.1CH USB ADAPTOR/CABLE SOLAR PANNEAU 5.5V/3W R – ET-9094 – EKOTEK
- 1.1 CH outdoor bluetooth boombox
- 12W sound output
- FM radio digital scan
- USB supports MP3 playback
- Bluetooth version: V2.1+EDR supports A2DP, AVRCP
- Clear sound and heavy bass, dynamic sound effect, 10m operating range
- AUX-In via 3.5mm input jack
- High quality rubber coating
- PV leather carrying strap
- Two level lantern brightness: 250lm / 500 lm
- Charge time DC adaptor via micro-USB: 10 hours
- Charge time solar panel 3W/5V: 6-13 hours
- Working time: 3-10 hours
- Battery: 3.7V/6600 mAh Lithium-Ion
- Accessories: USB adaptor USB charging cable AUX cable 3.5mm > 3.5mm plug Solar panel 3W/5V
- Solar panel size: 225.5x85.5x2.5 mm 5 mm
- Product size: 275x114.5x128 mm
- Color: grey
Reviews
There are no reviews yet.